LDG Electronics IT-100 Automatic Antenna TunersLDG Electronics IT-100 Automatic Antenna Tuners are the ideal tuners for your ICOM radio. They will match up to a 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go.They also have 2,000 memories--enough for every DXpedition, RTTY spot, and radio buddy you've got. Just hit the tune button on the radio, and your IT-100 will set tuner parameters in less than a second if you've been there before. If not, the tuner kicks off a full tuning cycle that will be over in about 3 seconds.Don't need the tuner now? Just tap the tune button briefly and the tuner goes into bypass mode. Press it again to bring the tuner back on line--it's just that simple.IT-100 ATUs weigh only 1.5 lbs. and get their DC power directly from the radio, so no separate power supply is required. IT-100 tuners work with any ICOM radio that supports AH-3 or AH-4 ICOM antenna tuners. Including; IC-7000, IC-7100, IC-7200, IC-7300, IC-706MkIIG, IC-718, IC-746, IC-756ProIII and all others that are AH-4 compatible.IT-100 tuners come fully assembled, aligned, and ready to use. The packages include a 14 in. ICOM radio interface cable, so you're ready to operate right out of the box. LDG Electronics IT-100 tuners are clearly the tuner of choice for your ICOM radio!Additional features include:* 0.1 to 125 watt power range (SSB and CW), 100W on 6M* Controlled from ICOM tuner button on radio OR push button on tuner* Compatible with any ICOM radio that is AH-4 or AH-3 compatible (6M tuning from tuner button for radios that are only AH-3 compatible)* Tuning time is 0.1 to 6 seconds full tune, 0.1 seconds memory tune* 1.8 to 54.0 MHz coverage with built-in frequency sensor* Tunes 4 to 800 ohm loads (16 to 150 on 6M), 4 to 3,600 ohms with optional 4:1 balun* Optional external balun allows tuning of random length, long wire, or ladder line fed antennasSe entrega:- Machador automático de antena LDG IT-100- Cable adaptador para radios ICOM